DIAMOND SEAL
is a hydrophobic coating technology for glass substrates.
the easy to clean effect appears from a chemical reaction of a soluble gel solution. after the curing, a cross linked three dimensional and only a few atoms thick nanoscale structure is created. this structure gives the glass a extremely durable hydrophobic effect.
the completely invisible treatment cannot be removed by water, cleaning agents or even with high pressure equipment. a special abrasive cleaning system has been developed to prepare the glass and remove contamination's prior the treatment.
we use a completely water based solution and can be used to remove hard water stains, silicon and wax, paint and cement, bleeding stains from joint sealer and render stains and other stubborn contamination's, completely scratch free.
our glass preparation system is the fastest, and most effective surface preparation and cleaning solution on the market. the superior efficiency of our cleaning system can be easy tested by simply spraying water onto a cleaned area. the water flattens and spreads out with a zero contact angle to form a thin film and no droplets, the indication for a perfectly clean piece of glass. why glass need maintenance
GLASS
Water Spot Removal | Maintenance Cleaning | Protective Treatments
Why should you seal your glass?
Glass is often thought to be invulnerable except for breakage, but will in fact corrode or stain if permitted. Surface corrosion or staining is often caused by the deposition of dissolved or suspended minerals in water droplets which are allowed to dry and harden on the glass. As the contaminated water droplets evaporate, the minerals (or salts) become more concentrated and form strong chemical bonds with the glass itself, leading to residues or stains that are difficult to remove, or a permanently damaged etched surface.
Proper protection of glass in windows, doors, and skylights throughout the construction process and the life of a building is essential. Planning and execution of the practices offered with the use of nanotechnology treatment will enable the glass to meet the aesthetic and performance expectations, and the needs of the building occupants.
What are the causes of surface damages on glass?
Water run-off from concrete or plaster surfaces. Hard water sources (high calcium concentration), high concentrations of silica or hydrogen sulphide in rainwater, (pollution), alkalis from agricultural dust, sealer rundown, wrong storage conditions on site and transport damages; occurs mainly on imported glass.
Nanotechnology surface treatment can protect the glass from all these contamination's and from permanent stains and can make the removal of such a substance significantly faster and easier.